Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi 27 — Samsung ML3550N

Code: 27

Display: JAM TA IN TRAY2
Description: Orange light on The occurrence of the paper Jam between the tray 2 Jam 0 sensor and the REGI sensor. Open the left cover and remove the Jammed paper.
Remedy: 1) Check the harness connected between the Engine controller and the T2 Jam 0 sensor. (If the harness is out, insert it to the connector.) 2) Check the harness between the REGI sensor and the Engine controller. (If the harness is out, insert it to the connector.) 3) Check the harness connected between the Engine controller and TA board. (If the harness is out, insert it to the connector.) 4) In the Engine diagnostic mode, operate the T2 Jam 0 sensor to check if the sensor is operating. (If it is not operating, replace the T2_Jam 0 sensor. 5) In the Engine diagnostic mode, operate the REGI sensor to check if the sensor is operating. (If it is not operating, replace the REGI sensor.) 6) In the Engine diagnostic mode, operate the TA_2 sensor to check if the sensor is operating. (If it is not operating, replace the TA board.) 7) In the Engine diagnostic mode, operate the TA clutch to check if the clutch is operating. (If it is not operating, replace the TA clutch.) 8) Check the damage or warping of the T2 Jam 0 sensor actuator. (If it is damaged or warped, replace the ARM1 Jam sensor or ARM2 Jam sensor.) 9) Replace the Engine controller.

← Xem tất cả mã lỗi Samsung ML3550N

Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie