Code: 28
Display: JAM TA IN TRAY3
Description: Orange light on The occurrence of the paper Jam between the tray 3 Jam 0 sensor and the REGI sensor. Open the SCF left cover and remove the Jammed paper.
Remedy: 1) Check the connecting of the SCF cable. (If the cable is out, insert it to the connector.) 2) Check the harness between the REGI sensor and the Engine controller. (If the harness is out, insert it to the connector.) 3) Check the harness connected between the SCF controller and T3 Jam 0 sensor. (If the harness is out, insert it to the connector.) 4) In the Engine diagnostic mode, operate the T3 Jam 0 sensor to check if the sensor is operating. (If it is not operating, replace the T3 Jam 0 sensor. 5) In the Engine diagnostic mode, operate the REGI sensor to check if the sensor is operating. (If it is not operating, replace the REGI sensor.) 6) In the Engine diagnostic mode, operate the TA_3 sensor to check if the sensor is operating. (If it is not operating, replace the TA_3 board.) 7) In the Engine diagnostic mode, operate the TA clutch to check if the clutch is operating. (If it is not operating, replace the TA clutch.) 8) Check the damage or warping of the T3 Jam 0 sensor actuator. (If it is damaged or warped, replace the ARM1 Jam sensor or ARM2 Jam sensor.) 9) Replace the SCF controller. 10) Replace the Engine controller.