Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi 30 — Samsung ML3550N

Code: 30

Display: JAM1
Description: Orange light on The occurrence of the paper Jam between the exit sensor and the REGI sensor. Open the duplex cover and remove the Jammed paper.
Remedy: 1) Check the harness connected between the Engine controller and the REGI sensor. (If the harness is out, insert it to the connector.) 2) Check the harness between the exit board and the Engine controller. (If the harness is out, insert it to the connector.) 3) In the Engine diagnostic mode, operate the exit_R sensor to check if the sensor is operating. (The top bin: If it is not operating, replace the exit board.) 4) In the Engine diagnostic mode, operate the exit_L sensor to check if the sensor is operating. (The left bin: If it is not operating, replace the exit board.) 5) In the Engine diagnostic mode, operate the REGI sensor to check if the sensor is operating. (If it is not operating, replace the REGI sensor.) 6) Check the damage or warping of the sensor actuator. (If it is damaged or warped, replace the exit sensor FD.) 7) In the Engine diagnostic mode, operate the TA clutch to check if the clutch is operating. (If it is not operating, replace the TA clutch.) 8) In the Engine diagnostic mode, check whether the REGI-clutch is operating. (If it is not operating, replace the REGI clutch.) 9) Replace the Engine controller.

← Xem tất cả mã lỗi Samsung ML3550N

Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie