Code: 72
Display: TRAY 3 PICKUP ARM ERROR
Description: Orange light on An error has occurred at the tray 3 pickup arm.
Remedy: 1) Check the connecting state of the SCF cable. (If the cable is out, insert it to the connector.) 2) Check the harness connected between the SCF controller and the Pickup unit. (If the harness is out, insert it to the connector.) 3) Check the harness connected between the Pickup unit and the cassette paper sensing board. (If the harness is out, insert it to the connector.) 4) In the Engine diagnostic mode, operate the tray 3 SOL to check if the solenoid is operating. (If it is not operating, replace the Pickup solenoid.) 5) Check the hook of the Pickup unit whether it is operating. (If it is not operating normally, replace the Pickup unit.) 6) Replace the cassette paper sensing board. 7) Replace the SCF controller.