Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi U1-2115, U1-2116 — Samsung ML4510ND

Code: U1-2115, U1-2116

Display: Fuser Unit Failure #U1-2115 : Turn off then on. Fuser Unit Failure #U1-2116 : Turn off then on.
Description: The fuser unit can’t control the pressure device.
Remedy: 1) Open the rear cover. Lift up the right side and release the rear cover. 2) Check if the Actuator Cam Photo sensor is assembled correctly. 3) If there is no problem, remove 4 screws. 4) Lift up the both levers. Then take off the fuser unit. 5) Check if the exit sensor is assembled correctly. 6) Check if the photo sensor harness is connected correctly. 7) Remove the fuser side cover L/R. Check if the Actuator can, Gear cam are assembled correctly. 8) If there is no problem for above steps, assemble and reinstall fuser unit. Then turn the machine on. 9) If the same error persists, install the firmware again. 10)If the same error persists, replace the fuser unit with new one. 11) If the same error persists, replace the main board.

← Xem tất cả mã lỗi Samsung ML4510ND

Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie