Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi U1-2320 — Samsung ML6512ND

Code: U1-2320

Display: Fuser Unit Failure: #U1-2320. Turn off then on
Description: The fuser unit is not installed or AC is not supplied to the Heat Lamp. Thermistor is defective.
Remedy: 1. Check if the fuser unit is installed properly. Turn the machine off then on. 2. Remove the fuser unit. Remove the COVER-UPPER. And measure the thermostat continuity. Check if the thermostat is opened. 3. Measure the LAMP-HALOGEN resistance value from the center and both sides. Check if it has the continuity. 4. Check if 2 thermistor connectors are connected properly. 5. Remove the thermistor. Check if the thermistor has curled as shown below. If there is any contamination on the fi lm, clean it. Caution - Be careful not to be scratched or curled the film. 6. Check if the thermistor connector on the engine board is connected properly. 7. Check if the FDB connector is connected properly. 8. Check if the voltage in user environment is in this range (80V - 140V, 160V - 260V). 9. Replace the FDB. If the problem persists, replace the engine board.

← Xem tất cả mã lỗi Samsung ML6512ND

Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie