Code: 1-052
Description: The printed image is light, with no ghosting.
Causes: 1. Engine board 2. Main body. 1. Engine board bias (290V - 310V) and supply voltage (490V - 510V) may be low. (Perform DCU diagnostic mode 04 to measure the voltage) 2. Strong ambient light at the manual feeder entrance.
Remedy: 1. Check the following parts : U201(KA324), Q204(D526-Y), T204(Transformer), U203(SN7407N) Resistors, Diodes and etc. in the output and feedback section 2-1. Check if contrast mode is set to ‘Light’. 2-2. Relocate printer or attach OPC cover sheet, part number JC72-49093A. Remark Bias and supply voltage check point: U203; #9 pulse input, #8 pulse output