Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi 2-030 — Samsung ML84

Code: 2-030

Description: Recording paper jammed in the output area (inside the fuser), or multiple sheets of paper are fed at once.
Causes: Engine board. 1. If the paper is stopped in front of or inside fuser: a) Feed sensor OP1 or feed actuator may be defective. b) Exit sensor SW1 defective, or deformed exit actuator may be defective. 2. In case of multi-feeding, refer to Error Code 2-050.
Remedy: 1-a. Check Feed Sensor OP1. Refer to Error Code 2-020. Replace Feed Actuator if deformed. 1-b. Check SW1 contents. In operating mode, CPU pin 48 should be below 0.7V. If not, check SW1 contact resistance. Replace SW1 if over 100 ohms. If the switch works normally, check R30 and R43. If deformed, replace the Exit Sensor Actuator. 2. In case of multi feeding, refer to Error Code 2-050.

← Xem tất cả mã lỗi Samsung ML84

Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie