Code: 3-020
Description: SCANNER ERROR message displayed on the LCD on or monitor screen.
Causes: 1. Defective LSU 2. Defective Q5 or CPU
Remedy: 1. Perform DCU diagnostic mode 05. If DCU error code 95 is displayed, replace LSU. If you cannot solve the problem after you replace LSU, follow the steps below: 2-1. When you press ENTER key in DCU mode ‘05’, if the LSU motor does not run, check Q5. Q5 collector and base are 0V and 0.7V respectively. If Q5 is normal, check CPU pin 40 and related parts. If the motor drives properly, and CPU pin 25 is not below 0.5V replace R26 and CPU. 2-2. When you press UP key in DCU mode ‘05’, if On and Off lamps do not turn on, check CPU pins 28 and 41, and related parts. Normally pin 28 is over 3.5V when high, and below 0.7V when low; pin 41 is below 0.7V when low. If transformer works normally, replace CPU.