Code: 3-050
Description: ENGINE ERROR or PLEASE WAIT message on the LCD of the operator panel or monitor screen.
Causes: 1. Harness between the engine and control boards. 2. Engine board. Defective interface between the engine and control boards(DCU error code 78)
Remedy: 1. Check the harness between the engine and control boards. 2-1. Check if the engine board works properly when the printer resets. U5 pin 1 should be below 0.7V for about 122 ms after power on, then remain over 3.5V. - Check U5 pin 2 = approx. 3.8V. If so, check R54 or R55. - Check U5 pin 3 = approx. 4V. If so, check R53, R56, or C35. - If the voltages are normal, and U5 pin 1 is below 0.7V, replace U5. - If all are normal, check CPU pin 55. If OK, replace CPU. 2-2. Check X1 oscillation (6.94407MHz). 2-3. Replace EPROM in the Engine board. 2-4. If all above are OK, replace CPU.