Code: 1-030
Description: Dark or blurry horizontal stripes occur in the printing periodically.
Causes: Developer cartridge. 1. Bad Developer roller contacts. 2. The rollers may be stained. -Abnormal image periodicity: 37 mm = Charge roller 31 mm = Supply roller 94 mm = OPC drum non-periodical = Blade
Remedy: 1. Check all voltages, and adjust as necessary. 2. If black stripes occur at 37mm intervals, check the Charge roller contacts. Clean if necessary, and check position of roller. 3. If blurry black stripes occur at 31mm intervals, disassemble and reassemble the Supply roller contacts. 4. If black stripes occur at 94mm intervals, replace the Developer. - Black stripes may occur due to static electricity. - Black or white stripes may occur due to bad OPC contact stud. In this case, disassemble the gear plate and remove any grease or contamination from the OPC stud. 5. If black stripes occur at irregular intervals, the Blade is defective. Replace the Developer.