Code: 1-051
Description: The printed image is light, but not ghosting.
Causes: Engine board. 1. Charge voltage(=MHV) on the Engine board exceeds 1350V - 1450V. (Perform DCU diagnostic mode 01 to measure the voltage) 2. No power to the Supply roller or Blade in the Developer.
Remedy: Check the following parts : U201(KA324), Q211(C1008), T202(Transformer), Resistors, Diodes and etc. in the output and feedback section. Charge voltage(=MHV) Check point: U201; while operating, #12/#13 2.5-2.9V, #14 5.5-8.5V while idling, #13 2.7V, #12/#14 0V Q201 operating voltage; Base 2-2.5V, Emitter 0-1V, Collector 30-60V U203; #1 0V input, #2 0V output