Code: 1-100
Description: Partially blank image, either periodically or non-periodically.
Causes: 1. Transfer roller 2. Developer cartridge. 1. Unequal pressure on the left and right transfer roller springs; the springs are damaged; the transfer roller is improperly installed; or the transfer roller bushing or holder is damaged. 2. If a black image prints light or gradually becomes light at intervals of 47mm, the transfer roller is defective. 3. If there is a partial blank image on left and right side of the page: 1) The life of the transfer roller has expired. 2) Abnormal transfer voltage. 3) The life of the developer has expired.
Remedy: 1. Replace the defective components. 2. Replace the transfer roller. 3-1. Replace the transfer roller. 3-2. Measure the transfer voltage. If the voltage is abnormal, disassemble the main board and clean the components stained with toner or paper particles. 3-3. Measure the weight of the developer. If the weight is less than 1000g, replace the developer.