Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi 2-040 — Samsung ML85

Code: 2-040

Description: Paper is completely fed out of the printer, but Jam2 occurs, or the paper is stuck in the fuser roller.
Causes: 1. Engine board 2. Fuser. 1. If Jam2 occurs after the paper is completely fed out of the printer, the exit sensor contact may be bad or the exit sensor actuator may be deformed.
Remedy: 1-1. Check if the exit sensor actuator is deformed, and replace if required. 1-2. Check the exit sensor switch contact and related parts. Refer to Error Code 2-030. 2. If the paper is stuck in the fuser, disassemble the fuser and remove the jammed paper, and clean the surface of the pressure roller with a soft cloth, dampened with alcohol.

← Xem tất cả mã lỗi Samsung ML85

Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie