Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi 1-080 — Samsung ML85G

Code: 1-080

Description: Background appears in the printing.
Causes: 1. Engine board 2. Developer cartridge 3. Transfer roller 4. Operating environment. 1-1. Transfer voltage low (in excess of approx. 10% below spec) 1-2. Supply and /or bias voltage high. 1-3. Negative transfer voltage is not correct. 1-4. Erasing lamp is defective (causing approx. 20% residual image) 2. Unauthorized recording paper has been used. 3. Abnormal ambient temperature or humidity.
Remedy: 1-1. Refer to Error Code 1-060. 1-2. Refer to Error Code 1-061. 1-3. Refer to Error Code 1-090 and 1-091. 1-4. If the erasing lamp does not turn on or off properly, check the lamp PCB and Q1/Q10 on the engine board. The erasing lamp should be on when CPU pin 35 is 0V. (Check the voltage after you remove the developer and manually activate the top cover switch). Replace the lamp if it does not come on. 2. Use the recommended type of recording paper. 3. If the printer is used in abnormal ambient conditions for a long time, print errors may occur.

← Xem tất cả mã lỗi Samsung ML85G

Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie