Code: 1-093
Description: When printing on card stock or transparencies using manual feeder, ghost occurs at 94mm intervals
Causes: 1. Improper paper type selected in menu setup 2. Engine board.1. When printing on card stock or transparencies, higher transfer voltage is required. Select Thick mode on paper type menu using panel or software application. 2. Defective transfer voltage circuit in the engine board.
Remedy: 1. Select Thick Mode on paper type menu using panel or software application to print on card stock or transparencies. 2. If the transfer voltage circuit in the engine board is out of specification, refer to Error Code 1-091