Code: 2-040
Description: Paper is completely fed out of the printer, but Jam2 occurs, or the paper is stuck in the fuser roller.
Causes: 1. Engine board 2. Fuser. 1. If Jam2 occurs after the paper is completely fed out of the printer, the exit sensor contact may be bad or the exit sensor actuator may be deformed.
Remedy: 1-1. Check if the exit sensor actuator is deformed, and replace if required. 1-2. Check the exit sensor switch contact and related parts. Refer to Error Code 2-030. 2. If the paper is stuck in the fuser, disassemble the fuser and remove the jammed paper, and clean the surface of the pressure roller with a soft cloth, dampened with alcohol.