Code: 3-011
Description: When printing, motor jams due to the defective fuser gear.
Causes: 1. Fuser 2. Engine board. Fuser control temperature set too high. Overheat circuit not operating properly. PC151 or Q3 defective.
Remedy: 1-1. Thermostat 1-2. Thermistor sensor 2-1. R57 and R58 = 3.3k and 1k, respectively. 2-2. Q3 C/E short. 2-3. Replace PC151 if pins 4 and 6 are shorted. 2-4. Replace Q101 if T1 and T2 are shorted. 2-5. Overheat circuit: Refer to solution 2-2 under Error Code 3-010.