Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi 3-050 — Samsung ML85G

Code: 3-050

Description: ENGINE ERROR or PLEASE WAIT message on the LCD of the operator panel or monitor screen.
Causes: 1. Harness between the engine and control boards. 2. Engine board. Defective interface between the engine and control boards(DCU error code 78)
Remedy: 1. Check the harness between the engine and control boards. 2-1. Check if the engine board works properly when the printer resets. U5 pin 1 should be below 0.7V for about 122 ms after power on, then remain over 3.5V. - Check U5 pin 2 = approx. 3.8V. If so, check R54 or R55. - Check U5 pin 3 = approx. 4V. If so, check R53, R56, or C35. - If the voltages are normal, and U5 pin 1 is below 0.7V, replace U5. - If all are normal, check CPU pin 55. If OK, replace CPU. 2-2. Check X1 oscillation (6.94407MHz). 2-3. Replace EPROM in the Engine board. 2-4. If all above are OK, replace CPU.

← Xem tất cả mã lỗi Samsung ML85G

Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie