Code: 3-080
Description: Main motor not driving while printing, and paper not feeding into printer, resulting ‘JAM 0’.
Causes: Engine board. 1. Motor harness may be defective. 2. R7 changed value. 3. U1 defective.
Remedy: 1. Check the motor harness. If defective or damaged, replace. 2. Check R7=5.6kohm or 1kohm. Replace with 5.6Kohm. 3-1. Perform DCU diagnostic mode 00 and check the motor. 3-2. In DCU mode 00, check for pulses at U1 pin 5 and pin 14. If not, check related parts. 3-3. In DCU mode 00, check U1 pins 2 and 11 are over 4V. If the pins are below 1V, check Q2, D3 and D8. 3-4. If all above are OK, replace U1.