Code: 3-100
Description: When system power is turned on, the printer does not turn on.
Causes: Engine board. 1-1. Harness between engine and control boards. 1-2. Defective harness between the control board and panel. 1-3. Fuse F151 2-1. Fuse F101
Remedy: 1-1. Check the harness between engine and control boards. If defective or damaged, replace. 1-2. Check the harness between control board and operator panel. If defective or damaged, replace. 1-3. Check F151 on the engine board. If open, measure the resistance between 5V and ground. If below50ohm, it is shorted. 2-1. Check F101 on the engine board. If open, check : - open R114 - Q102 shorted D-S, G-D, G-S - Defective DB101