Code: 14
Display: OVER HEAT ERROR
Description: The fuser temperature has risen too far. If the temperature of heat roller abnormally increases above the toner-fusing-temperature parts of the fuser may be thermally degraded.
Remedy: The machine will automatically return to standby mode when it cools down to the normal operating temperature. * Check DC control signal from Main PBA to TRIAC and AC supply from SMPS to fuser. * Check the thermister on the fuser for contamination by toner debris or dust and clean the thermister surface. * Please test the fuser in engine test mode. * If the problem still persists, replace fuser unit.