Remedy: 1) Open the side cover. Remove the jammed paper from the MP tray. 2) If this jam error occurs frequently, check the rollers of the MP unit. a) Check if the MP pick up/ reverse/ forward rollers are assembled correctly. b) If the MP pick up/ reverse/ forward rollers are worn out or contaminated, replace the defective roller(JC93-00540A). 3) If the problem persists, check if the MP solenoid operates correctly. a) By Service-mode, Check the operation of solenoid. (Diagnostics > Engine Diagnostics > Engine Test Routines > 101-0271 b) If the MP solenoid is defective, check the connection of MP unit. c) If the harness has no defects, replace the solenoid(JC33-00029B). If the problem persists, check the main drive unit. a) Check the harness from Regi/MP drive unit to main board. b) By service-mode, check if the drive motor and clutch operate correctly. (Diagnostics > Engine Diagnostics > Engine Test Routines > 100-0010) (Diagnostics > Engine Diagnostics > Engine Test Routines > 101-0270) c) If the problem occurs, replace the drive main (JC93-00448A).