Display: Input System Failure #M1-4111 : Pull Tray 1 out and insert it.
Description: The paper is not fed from tray1.
Remedy: 1) Remove Tray1 and re-install. 2) If the problem persists, Turn the machine off than on. 3) Check if the connection from pickup drive unit and main board is correctly. 4) Check the pickup drive unit operates correctly. a) Check the harness connection from pickup drive unit to main board is correctly. b) By service-mode, check the pickup drive unit operates correctly. ( Diagnostics > Engine Diagnostics > Engine Test Routines > 100-0370) c) If the problem occurs, replace the pickup drive unit(JC93-00442A). 5) If the problem persists, check the pickup unit. a) Check the photo sensor in the pickup unit is defective. b) Check the sensor operates correctly. c) If the problem occurs, replace the photo sensor(0604-001393)