Remedy: 1) Open the side cover and check if a foreign substance or paper is jammed inside the unit. 2) Remove tray1 and remove the jammed paper. 3) If this jam error occurs frequently, check the rollers of the pickup-roller unit. a) Check if the pick up/ reverse/ forward rollers are assembled correctly. b) If the pick up/ reverse/ forward rollers are worn out or contaminated, replace the defective roller(JC93-00540A). 4) If the problem persists, check the pickup unit and feed sensor. a) Check if the pickup unit and feed sensor operate correctly. b) Check if the harness from pickup unit to main board is connected correctly. c) Check if the connector of the fuide-feed assembly is connected correctly. d) Check if the harness of pickup unit and feed sensor is disconnected. 5) If the problem persists, check the pickup unit. a) Remove the pickup unit and check the connection of the actuator and actuator-sensor. b) Push the pickup-lever and check if it operates correctly. 6) If the problem persists, replace the pickup drive unit(JC93-00422A) or Pickup unit(JC93-00540A).