Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi 36 — Samsung SF430

Code: 36

Description: The Printer is Not Working (2) Even after the Print command, there is no response at all or the printing speed is low.
Causes: It may due to wrong setup of the environment rather than malfunction of the printer itself. And in case that abnormal characters are printed out, also check the environment setup. 1. Secure the hard disk space. 2. Printing error occurs even if there is enough space in the hard disk. 3. Reboot the system, and try printing again.
Remedy: 1. Not working with the message 'Insufficient memory' means that the hard disk space to store the print information is insufficient rather than the RAM insufficiency. In this case, secure more space for the hard disk. Secure more space for C drive by using the Disk utilities program at 'PROGRAM - ACCESSORIES - SYSTEM TOOL' from the Start menu. 2. The connection of the cable or printer port is not properly setup. 3. If characters are printed abnormally, the cable or the printer driver may be defective. Turn the PC and printer off, and reboot the system to try printing again. If the problem still exists, double click to install the printer from My Computer and right-click the mouse, then click 'Test Print' button at the bottom of the file information tab. If normal characters are not printed again, the cable must be defective so replace the cable with a new one.

← Xem tất cả mã lỗi Samsung SF430

Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie