Code: 11
Description: Can't PRINT
Causes: 1. Check centronics cable connection. 2. Is Standby LED of the system on? 3. Check how print driver has been installed. 4. Check I/F part of parallel port. 1) Check the initial state of print control signal of CON8.: No.1, 10 -14, 31, 32, 36 2) Check input and output signal of U14. 3) Check input and output signals of U15-43-51 and U15-53-61. 5. Refer to 2 and 3 of 6-4 PRINGTING QUALITY.
Remedy: 1. Connect it correctly. 2. Press OstandbyO key to keep the standby mode. 3. Install the print driver again and reboot the system. 4. Replace the main PBA. 5. Refer to 2 and 3 of 6-4 PRINGTING QUALITY.