Code: 05
Description: Light Image The printed image is light, with no ghost.
Causes: 1. Toner Save mode enabled 2. Develop roller is contaminated or the toner cartridge is almost empty. 3. Ambient temperature is below than 10°C. 4. Bad contact caused by dirty terminals on the toner cartridge or set. 5. Abnormal output from the HVPS.
Remedy: 1. Ensure the Toner Save mode is off. Check set and driver settings. 2. Replace the toner cartridge and try to print out again. 3. Wait 30 minutes after printer is powered on before you start printing. 4. Clean the cartridge and set contacts. Generally clean dirt from inside the set. 5. Replace the HVPS if the problems are not solved by the above four instructions.