Code: 32
Description: JAM 1 1. Paper is jammed in front of or inside the fuser. 2. Paper is stuck in the exit roller and in the fuser just after passing through the Actuator-Feed.
Causes: 1. If the recording paper is jammed in front of or inside the fuser. 2. If the recording paper is stuck in the exit roller and the fuser just after passing through the Actuator-Feed, Feed Actuator may be defective.
Remedy: 1. Replace the Exit-Sensor, SMPS or main PBA. 2. Reassemble the Actuator-Feed and Spring-Actuator if the movement is bad. Replace if necessary.