Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi M2–2214, M2–2310 — Samsung SLM4580FX

Code: M2–2214, M2–2310

Display: Paper jam inside of duplex path Paper jam at the top of duplex path Paper jam at the bottom of duplex path
Description: The paper did not enter the duplex path and has jammed.
Remedy: 1) Remove the jammed paper. If the same error occurs continually, check the following. 2) Check if there are any obstacles or contamination in the duplex path. 3) Check if the exit actuator(JC66-02850A) of the fuser unit works normally. 4) Check if the exit motor works normally and its connector is connected properly. 5) If the exit motor is defective, replace it or exit drive unit(JC93-00349A). 6) Check if the duplex clutch works normally and its connector is connected properly. 7) If the duplex clutch(JC47-00033E) is defective, replace it.

← Xem tất cả mã lỗi Samsung SLM4580FX

Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie