Code: 8A
Description: Paper jam in the paper tray1.
Causes: • Check if the paper is jammed at the paper tray and the front cover. • Adjust the paper guide corresponding to the paper size. • Check if the thickness of the paper is 60 to 105 g/m2. • Check if too much paper is loaded in the tray
Remedy: 1 Paper edge actuator catching on some position Correct the position of the paper edge actuator. 2 Registration front actuator catching on some position Correct the position of the registration front actuator. 3 Harness connection failure of registration front/rear sensor PCB ASSY Check the harness connection of the registration front/rear sensor PCB ASSY and reconnect it. 4 Paper feeding kit worn out Replace the paper feeding kit. 5 High voltage power supply PCB failure Replace the high voltage power supply PCB ASSY. 6 Registration front/rear sensor PCB failure Check the registration front/rear sensor performance following the procedure described in "Function code 32". If any problem occurs, replace the regist frame ASSY.