Code: C4001
Description: Faulty HSYNC • The SOS sensor does not detect a rising edge of SOS within a given period of time after the polygon motor has started turning and a laser output has been started. • The SOS sensor detects no rising edges of SOS while VIA (image area control) is ON.
Causes: PH unit C4101 Polygon motor malfunction Printer control board (PRCB)
Remedy: 1 Turn OFF and ON the power switch. 2 Check the connector between PH unit-PRCB CN1, CN2 for proper connection and correct as necessary. 3 Change PH unit. 4 Change PRCB.