Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi 85 — Konica-Minolta bizhub 20

Code: 85

Description: Tray 1 is not installed into the machine
Causes: Tray 1 PE/edge sensor PCB/ Tray 2 PE/edge sensor PCB failure. Harness connection failure of Tray 1 PE/edge sensor PCB/ Tray 2 PE/edge sensor PCB. Main PCB failure. Connector 55533-1219 failure (only Tray 2)
Remedy: Check the sensor performance following the procedure described in "4.10 Sensor Operational Check (Function code 32)" in Chapter 6. If any problem occurs, replace the Tray 1 PE/edge sensor PCB failure/Tray 2 PE/edge sensor PCB. Check the harness connection of the Tray 1 PE/edge sensor PCB/Tray 2 PE/edge sensor PCB. and reconnect it. Replace the main PCB ASSY. Replace the connector 55533-1219.

← Xem tất cả mã lỗi Konica-Minolta bizhub 20

Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie