Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi D-1 — Konica-Minolta bizhub 223

Code: D-1

Description: Split line detect
-When the main/sub power switches are turned ON or when the machine is recovering from the power save mode, if the original cover is not open, the cleaning brush rotates 360 degrees to detect whether or not stain exists in the original reading section. This warning will be displayed if the original is set to ADF when stain exist.
- The thin line detection level and the warning display can be changed by the following setting. Split Line Detect. Setting
Remedy: 1 Wipe clean the glass surface of the DF original glass. 2 Check the glass cleaning roller unit for proper installation and correct if necessary. 3 Select [Service Mode] - [System 2] - [Split Line Detect. Setting], and change the setting. 4 Check the DFCB connector for proper connection and correct as necessary. 5 M4 operation check. 6 Change glass cleaning brush. 7 Change DFCB.

← Xem tất cả mã lỗi Konica-Minolta bizhub 223

Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie