Code: C0210
Description: LCT lift failure (When PC-413 is installed) • The main tray upper limit sensor (PS136) is not turned ON (blocked) even after the set period of time has elapsed after the paper lift-up operation for the drawer began. • The shifter stop / lower limit position sensor (PS138) is not turned OFF (unblocked) even after the set period of time has elapsed after the paper lift-up operation for the drawer began. • The main tray upper limit sensor (PS136) is not turned ON (blocked) even after the set period of time has elapsed after the paper lift-up operating. • The main tray upper limit sensor (PS136) is not turned OFF (unblocked) even after the set period of time has elapsed after the paper lift-down operation began. • The shifter stop / lower limit position sensor (PS138) is not turned ON (blocked) even after the set period of time has elapsed after the paper lift-down operation began.
Causes: • Elevator motor (M134) • Main tray upper limit sensor (PS136) • Shifter stop / lower limit position sensor (PS138) • PC control board (PCCB) • MFP board (MFPB)
Remedy: 1. Check the connector between M134-PCCB CN10 for proper connection and correct as necessary. 2. Check the connector of M134 for proper drive coupling and correct as necessary. 3. Check the connector between PS136-relay CN1-PCCB CN4 for proper connection and correct as necessary. 4. Check the connector between PS138-relay CN16-PCCB CN14 for proper connection and correct as necessary. 5. PS136 I/O check, sensor check • Control signal: PCCB CN4-3 (ON) • Location of electrical component: PC-413 8-J 6. PS138 I/O check, sensor check • Control signal: PCCB CN14-6 (ON) • Location of electrical component: PC-413 4-J 7. M134 operation check • Control signal: PCCB CN10-1 to 2 • Location of electrical component: PC-413 6-J 8. Replace M134. 9. Replace PCCB. 10. MFPB F4E conduction check 11. Replace MFPB.