Description: AC signal abnormality. The zero cross signal is not input during fusing phase control.
Causes: • Fusing unit • DC power supply (DCPU) • MFP board (MFPB)
Remedy: 1. Check the fusing unit for correct installation (whether it is secured in position). 2. Check the fusing unit-DCPU CN2 for proper connection and correct or change as necessary. 3. Check the connector between DCPU CN7-MFPB CN2E for proper connection and correct as necessary. 4. Replace the fusing unit. 5. MFPB F1E conduction check 6. Replace MFPB. 7. Replace DCPU.