Code: C6102
Description: Drive system home sensor malfunction. • The scanner home sensor (PS105) is unable to detect the scanner located at its home position. • The scanner home sensor (PS105) is unable to detect a scanner even when the scanner motor (M101) has been driven to move the scanner over the maximum travelling distance. • The scanner home sensor (PS105) detects the scanner when the scanner has moved the maximum travelling distance from the position, at which it blocks the scanner home sensor (PS105).
Causes: • Scanner home sensor (PS105) • Scanner motor (M101) • MFP board (MFPB)
Remedy: 1. Correct or change the scanner drive (pulley, gear, belt) if it is faulty. 2. Correct the scanner motor set screw if loose. 3. Adjust [Image Position: Leading Edge] and [Sub Scan Zoom Adj.]. 4. Check the connector between M101-relay CN6IR-MFPB CN26E for proper connection and correct as necessary. 5. Check the connector between PS105-MFPB CN27E for proper connection and correct as necessary. 6. PS105 I/O check, sensor check • Control signal: MFPB CN27E-15 (ON) • Location of electrical component: 5-V 7. M101 operation check • Control signal: MFPB CN26E-1 to 4 • Location of electrical component: 6-W 8. Replace MFPB.