Code: C0211
Description: Manual feed up/down abnormality • Paper is not turned OFF (unblock) the bypass tray position sensor (PS28) even after the transport motor (M1) rotates for a given period of time after the position is switched from stand by position at lift-up plate to the feed position. • The bypass tray position sensor (PS28) is not turned ON (blocked) even after the transport motor (M1) rotates for a given period of time after the position is switched from stand by position at lift-up plate to the feed position
Causes: • Transport motor (M1) • Bypass pick-up solenoid (SD1) • Bypass tray position sensor (PS28) • MFP board (MFPB)
Remedy: 1. Check the connector between M1-MFPB CN19E for proper connection and correct as necessary. 2. Check the connector of M1 for proper drive coupling and correct as necessary. 3. Check the connector between PS28-relay CN91 (bizhub 367), CN34 (bizhub 287), CN90 (bizhub 227)-MFPB CN9 for proper connection and correct as necessary. 4. SD1-relay CN41- relay CN91 (bizhub 367), CN34 (bizhub 287), CN90 (bizhub 227)-MFPB CN9E for proper connection and correct as necessary. 5. PS28 I/O check, sensor check • Control signal: MFPB CN9E-3 (ON) • Location of electrical component: 3-J 6. SD1 operation check • Control signal: MFPB CN9E-12 (ON) • Location of electrical component: 4-J 7. M1 operation check • Control signal: MFPB CN19E-3 to 7 • Location of electrical component: 26-C 8. Replace M1. 9. MFPB F5E conduction check 10. Replace MFPB.