Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi C1196 — Konica-Minolta bizhub 287

Code: C1196

Description: Center fold roller motor malfunction (When FS-534SD is installed) The guide home sensor (PS7) is not turned ON (blocked) or OFF (unblocked) even after the set period of time has elapsed after the center fold roller motor (M8) is turned ON.
Causes: • Center fold roller motor (M8) • Guide home sensor (PS7) • SD drive board (SDDB) • FS control board (FSCB)
Remedy: 1. Check the connector between M8-SDDB J8 for proper connection and correct as necessary. 2. Check the connector of M8 for proper drive coupling and correct as necessary. 3. Check the connector between PS7-SDDB J9 for proper connection and correct as necessary. 4. PS7 I/O check, sensor check • Control signal: SDDB J9-6 (ON) • Location of electrical component: SD-511 4-G 5. M8 operation check • Control signal: SDDB J8-11 to 14 • Location of electrical component: SD-511 2 to 3-F to G 6. Replace M8. 7. Replace SDDB. 8. Replace FSCB.

← Xem tất cả mã lỗi Konica-Minolta bizhub 287

Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie