Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi C3921 — Konica-Minolta bizhub 287

Code: C3921

Description: Fusing sensor wire breaks detection (Middle of the heating roller) The maximum value and minimum value of detected temperature of the thermistor/2 (TH2) is compared after a lapse of given time from starting of warm up and the gap between the value of maximum and minimum is below a given temperature.
Causes: • Fusing unit • C3921: Thermistor/1 (TH1) • C3922: Thermistor/2 (TH2) • MFP board (MFPB)
Remedy: 1. Check the fusing unit for correct installation (whether it is secured in position). 2. Check the open/close operation of the right door. 3. Check the connector between the fusing unit-relay CN19-MFPB CN18E for proper connection and correct as necessary. 4. Replace the fusing unit. 5. Replace MFPB.

← Xem tất cả mã lỗi Konica-Minolta bizhub 287

Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie