Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi 155.00 — Konica-Minolta bizhub 3320

Code: 155.00

Description: No encoder received from auger motor.
Remedy: Step 1: Is the button aligned with the front of the toner cartridge? Yes: Go to step 2. No: Go to step 3.
Step 2: Check the gear on the toner cartridge for wear or damage. Is it free of wear or damage? Yes: Go to step 5. No: The problem is solved.
Step 3: Remove, and then reinstall the toner cartridge. Make sure that it is properly seated.. Is it button in the correct position? Yes: Go to step 4. No: Go to step 5.
Step 4: Run a print test. Does the problem remain? Yes: Go to step 5. No: The problem is solved.
Step 5: Replace the toner cartridge Does the problem remain? Yes: Go to step 6. No: The problem is solved.
Step 6: Check the gears on the cartridge gearbox for proper rotation and for wear or damage. Does it rotate properly and is it free of wear or damage? Yes: Go to step 7. No: Replace the cartridge gearbox.
Step 7: Check the cartridge gearbox cable for proper connection to the controller board. Is it properly connected? Yes: Go to step 8. No: Reseat the cable.
Step 8: Check the cartridge gearbox cable for damage. Is it free of damage? Yes: Replace the controller board. No: Replace the cartridge gearbox.

← Xem tất cả mã lỗi Konica-Minolta bizhub 3320

Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie