Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi C0107 — Konica-Minolta bizhub 367

Code: C0107

Description: Tray 3/LCT vertical transport motor turning at abnormal timing (When PC-113, PC-213 or PC-413 is installed) • The motor lock signal remains HIGH for a predetermined continuous period of time while the motor is turning. • The motor lock signal remains LOW for a predetermined continuous period of time while the motor remains stationary.
Causes: <When PC-113 or PC-213 is installed> • Tray 3 vertical transport motor (M112) • PC control board (PCCB) <When PC-413 is installed> • Vertical transport motor (M132) • PC control board (PCCB)
Remedy: (a) When PC-113 or PC-213 is installed 1. Check the connector between M112-PCCB CN5 for proper connection and correct as necessary. 2. Check the connector of M112 for proper drive coupling and correct as necessary. 3. M112 operation check • Control signal: PCCB CN5-13 (CW/CCW) • Location of electrical component: PC-113/PC-213 3 to 4-C 4. Replace M112. 5. Replace PCCB. NOTICE • Link to the wiring diagram (N.2.2 PC-113) • Link to the wiring diagram (N.2.3 PC-213) (b) When PC-413 is installed 1. Check the connector between M132-PCCB CN5 for proper connection and correct as necessary. 2. Check the connector of M132 for proper drive coupling and correct as necessary. 3. M132 operation check • Control signal: PCCB CN5-13 (CW/CCW) • Location of electrical component: PC-413 4 to 5-J 4. Replace M132. 5. Replace PCCB. NOTICE • Link to the wiring diagram (N.2.4 PC-413)

← Xem tất cả mã lỗi Konica-Minolta bizhub 367

Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie