Description: Tray 4 lift-up failure (When PC-213 is installed) The tray 4 upper limit sensor (PS126) is not turned ON (blocked) even after the set period of time has elapsed after the paper lift-up operation for the drawer began.
Causes: • Tray 4 lift-up motor (M123) • Tray 4 upper limit sensor (PS126) • PC control board (PCCB) • MFP board (MFPB)
Remedy: 1. Check the connector between M123-PCCB CN8 for proper connection and correct as necessary. 2. Check the connector of M123 for proper drive coupling and correct as necessary. 3. Check the connector between PS126-relay CN47-PCCB CN7 for proper connection and correct as necessary. 4. PS126 I/O check, sensor check • Control signal: PCCB CN7-3 (ON) • Location of electrical component: PC-213 8-K 5. M123 operation check • Control signal: PCCB CN8-8 to 9 • Location of electrical component: PC-213 5-K 6. Replace M123. 7. Replace PCCB. 8. MFPB F4E conduction check 9. Replace MFPB. NOTICE • Link to the wiring diagram (N.2.3 PC-213)