Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi C0211 — Konica-Minolta bizhub 367

Code: C0211

Description: Manual feed up/down abnormality • Paper is not turned OFF (unblock) the bypass tray position sensor (PS28) even after the transport motor (M1) rotates for a given period of time after the position is switched from stand by position at lift-up plate to the feed position. • The bypass tray position sensor (PS28) is not turned ON (blocked) even after the transport motor (M1) rotates for a given period of time after the position is switched from stand by position at lift-up plate to the feed position
Causes: • Transport motor (M1) • Bypass pick-up solenoid (SD1) • Bypass tray position sensor (PS28) • MFP board (MFPB)
Remedy: 1. Check the connector between M1-MFPB CN19E for proper connection and correct as necessary. 2. Check the connector of M1 for proper drive coupling and correct as necessary. 3. Check the connector between PS28-relay CN91 (bizhub 367), CN34 (bizhub 287), CN90 (bizhub 227)-MFPB CN9 for proper connection and correct as necessary. 4. SD1-relay CN41- relay CN91 (bizhub 367), CN34 (bizhub 287), CN90 (bizhub 227)-MFPB CN9E for proper connection and correct as necessary. 5. PS28 I/O check, sensor check • Control signal: MFPB CN9E-3 (ON) • Location of electrical component: 3-J 6. SD1 operation check • Control signal: MFPB CN9E-12 (ON) • Location of electrical component: 4-J 7. M1 operation check • Control signal: MFPB CN19E-3 to 7 • Location of electrical component: 26-C 8. Replace M1. 9. MFPB F5E conduction check 10. Replace MFPB.

← Xem tất cả mã lỗi Konica-Minolta bizhub 367

Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie