Description: Fusing sensor wire breaks detection (Edge of the heating roller) The maximum value and minimum value of detected temperature of the thermistor/2 (TH2) is compared after a lapse of given time from starting of warm up and the gap between the value of maximum and minimum is below a given temperature.
Remedy: 1. Check the fusing unit for correct installation (whether it is secured in position). 2. Check the open/close operation of the right door. 3. Check the connector between the fusing unit-relay CN19-MFPB CN18E for proper connection and correct as necessary. 4. Replace the fusing unit. 5. Replace MFPB.