Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi C8107 — Konica-Minolta bizhub 367

Code: C8107

Description: Glass cleaning mechanism trouble (When DF-628 is installed). The original reading glass cleaning sensor (PS12) is not turned OFF (unblocked) after the set period of time has elapsed after the glass cleaning motor (M4) is turned ON.
Causes: • Glass cleaning motor (M4) • Original reading glass cleaning sensor (PS12) • DF control board (DFCB)
Remedy: 1. Check the connector between M4-DFCB J8 for proper connection and correct as necessary. 2. Check the connector of M4 for proper drive coupling and correct as necessary. 3. Check the connector between PS12-DFCB J15 for proper connection and correct as necessary. 4. PS12 I/O check, sensor check • Control signal: DFCB J15-5 (ON) • Location of electrical component: DF-628 3-G 5. M4 operation check • Control signal: DFCB J8-1 to 4 • Location of electrical component: DF-628 1 to 2-B 6. Replace M4. 7. Replace DFCB.

← Xem tất cả mã lỗi Konica-Minolta bizhub 367

Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie