Code: 140.20
Description: Transport motor took too long to stop.
Remedy: Step 1: Remove the main drive gearbox and check for any debris. Is it free of debris? Yes: Go to step 2. No: Remove the debris.
Step 2 Check the gears of main drive gearbox for wear or damage. Are they free of wear or damage? Yes: Go to step 3. No: Replace the main drive gearbox.
Step 3: Check the main drive motor for proper operation: 1. Remove the main drive gearbox. Note: Do not disconnect the main drive gearbox cable. 2. POR into the Diagnostics menu and perform a feed test: Diagnostics Menu >Input Tray Tests >Feed Test > Select any input source 3. Check if the main drive motor rotates when doing the feed test. Does it rotate when doing the feed test? Yes: Replace the controller board. No: Replace the main drive gearbox.
Step 2 Check the gears of main drive gearbox for wear or damage. Are they free of wear or damage? Yes: Go to step 3. No: Replace the main drive gearbox.
Step 3: Check the main drive motor for proper operation: 1. Remove the main drive gearbox. Note: Do not disconnect the main drive gearbox cable. 2. POR into the Diagnostics menu and perform a feed test: Diagnostics Menu >Input Tray Tests >Feed Test > Select any input source 3. Check if the main drive motor rotates when doing the feed test. Does it rotate when doing the feed test? Yes: Replace the controller board. No: Replace the main drive gearbox.