Code: 155.00
Description: No encoder received from auger motor.
Remedy: Step 1: Is the button aligned with the front of the toner cartridge? Yes: Go to step 2. No: Go to step 3.
Step 2: Check the gear on the toner cartridge for wear or damage. Is it free of wear or damage? Yes: Go to step 5. No: The problem is solved.
Step 3: Remove, and then reinstall the toner cartridge. Make sure that it is properly seated.. Is it button in the correct position? Yes: Go to step 4. No: Go to step 5.
Step 4: Run a print test. Does the problem remain? Yes: Go to step 5. No: The problem is solved.
Step 5: Replace the toner cartridge Does the problem remain? Yes: Go to step 6. No: The problem is solved.
Step 6: Check the gears on the cartridge gearbox for proper rotation and for wear or damage. Does it rotate properly and is it free of wear or damage? Yes: Go to step 7. No: Replace the cartridge gearbox.
Step 7: Check the cartridge gearbox cable for proper connection to the controller board. Is it properly connected? Yes: Go to step 8. No: Reseat the cable.
Step 8: Check the cartridge gearbox cable for damage. Is it free of damage? Yes: Replace the controller board. No: Replace the cartridge gearbox.
Step 2: Check the gear on the toner cartridge for wear or damage. Is it free of wear or damage? Yes: Go to step 5. No: The problem is solved.
Step 3: Remove, and then reinstall the toner cartridge. Make sure that it is properly seated.. Is it button in the correct position? Yes: Go to step 4. No: Go to step 5.
Step 4: Run a print test. Does the problem remain? Yes: Go to step 5. No: The problem is solved.
Step 5: Replace the toner cartridge Does the problem remain? Yes: Go to step 6. No: The problem is solved.
Step 6: Check the gears on the cartridge gearbox for proper rotation and for wear or damage. Does it rotate properly and is it free of wear or damage? Yes: Go to step 7. No: Replace the cartridge gearbox.
Step 7: Check the cartridge gearbox cable for proper connection to the controller board. Is it properly connected? Yes: Go to step 8. No: Reseat the cable.
Step 8: Check the cartridge gearbox cable for damage. Is it free of damage? Yes: Replace the controller board. No: Replace the cartridge gearbox.