Code: 321.52
Description: ACM motor stop error
Remedy: Step 1: Check the cable J11 on the option tray controller board. Is it properly connected? Yes: Go to step 2. No: Reseat the cable.
Step 2: 10. Remove the option tray insert and bypass the tray present sensor. 11. POR into the Diagnostics Menu and perform a feed test: Diagnostics Menu >Feed Test > choose an option tray 12. Check the ACM for proper operation. Does the ACM freely rotate three times before displaying a jam message? Yes: Go to step 3. No: Replace the ACM assembly.
Step 3: Is the ACM gear free of wear or damage? Yes: Contact the next level of support. No: Replace the ACM assembly.
Step 2: 10. Remove the option tray insert and bypass the tray present sensor. 11. POR into the Diagnostics Menu and perform a feed test: Diagnostics Menu >Feed Test > choose an option tray 12. Check the ACM for proper operation. Does the ACM freely rotate three times before displaying a jam message? Yes: Go to step 3. No: Replace the ACM assembly.
Step 3: Is the ACM gear free of wear or damage? Yes: Contact the next level of support. No: Replace the ACM assembly.