Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi 0960 — Konica-Minolta bizhub 42

Code: 0960

Description: Tray 1 feeder up/down abnormality
• Paper does not unblock the tray 1 lift-up position sensor (PS20) even after the transport motor (M1) rotates for a given period of time after the position is switched from stand by position at lift-up plate to the feed position. • The tray 1 lift-up position sensor (PS20) is not blocked even after the transport motor (M1) rotates for a given period of time after the position is switched from stand by position at lift-up plate to the feed position.
Remedy: 1 Check the connector between M1-PRCB CN3 for proper connection and correct as necessary. 2 Check the connector of M1 for proper drive coupling and correct as necessary. 3 Check the connector between PS20-PRCB CN9 for proper connection and correct as necessary. 4 Check the connector between SD1-relay CN99-relay CN15- PRCB CN9 for proper connection and correct as necessary. 5 PS20 I/O check, sensor check 6 SD1 operation check 7 M1 operation check 8 Change M1 9 Change PRCB

← Xem tất cả mã lỗi Konica-Minolta bizhub 42

Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie